Function Commands (Macros) - Mitel Aastra 470 System Manual

Annex
7. 4. 4

Function commands (macros)

Function commands are used mainly for automatically activating/ deactivating fea-
tures using the function keys of the system phones. The following function com-
mands are available:
Tab. 132 Function commands for system phones
Function command Meaning
"A" Seize line with maximum priority
"I" Seize line
"H" Seize line in hands-free mode
"X" Disconnect
"P" Pause 1 second before next action
"Lxx" Seize line xx (line keys)
"N" Enter call number keyed in during call preparation
"." Control keys function
"Z" Activate / deactivate DTMF mode (tone dialling)
"R" Use call number last dialled
"Y" End call and reseize line
1)
Available only with the key telephones.
2)
Available for Aastra 600c/d only.
3)
Not available for Office 10.
The function commands can be stored directly on the system phones via Self Ser-
vice Portal or on the function keys via WebAdmin.
Note:
As the Office 10 does not have a text mode, only 3 function commands
can be stored on function keys on this phone. The 3 function commands
are entered using the following keys:
Tab. 133 Function commands on function keys Office 10
Pause 1 second before next action
Control keys function
Activate / deactivate DTMF mode (tone dialling)
274
1)
2)
1)
3)
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014