Mitel Aastra 470 System Manual page 235

Event / error message
E-mail successfully sent
ESME reachable
ESME unreachable
Ethernet activated again
Ethernet deactivated due to
high load
External auxiliary power sup-
ply failed
External auxiliary power sup-
ply in service
External event message desti-
nation not reachable
External event message desti-
nation reachable
Fan failure
Fan in operation
FIAS command buffer full
FIAS interface usable again
G.729 Codecs within the
licence limit again
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014
Trigger condition
The system has now successfully sent an e-mail.
Meaning of the parameter values in
The LAN connection between the SMSC and
the ESME is now available
The LAN connection between the SMSC and
the ESME is interrupted
The overload on the Ethernet interface no
longer exists. The interface has been reacti-
vated.
The system has detected an overload on the
Ethernet interface. The interface is temporarily
deactivated.
The external auxiliary power supply to the com-
munication server has failed. If the auxiliary
power supply unit has been used for redundant
operation, there are no short-term limitations.
If the auxiliary power supply unit has been used
to increase the power supply, the internal
power supply unit overflow must be calculated.
The external auxiliary power supply to the com-
munication server is working.
External signal destination not automatically
reachable
External signal destination is now reachable
The fan is jammed or defective or the connec-
tion is no longer making contact.
• Parameter = 0: No more fans in operation.
 Risk of overheating: System shut down
after 2 minutes.
 Replace defective fan.
• Parameter = 1: Only one fan left in operation.
 System still running with only one fan.
 Replace defective fan.
The fan is back in service again after a failure.
• Parameter = 0: A fan is back in service again.
• Parameter = 1: Second fan back in service
again.
The command buffer to the PMS interface is
full.
The command buffer to the PMS interface is
back below the critical limit.
Free G.729 codecs are once again available for
connections.
Operation and Maintenance
Details
Cause/action=0000, e-mail cli-
Tab. 97 ent, additional information,
date, time
IP address, date, time
IP address, date, time
Date, time
Date, time
Date, time
Date, time
Cause (0: Busy /1: Not available
/2:(not used), 2: Barred /3: not
defined), date, time
Date, time
Parameter, date, time
Parameter, date, time
Date, time
Date, time
Date, time
235