Mitel Aastra 470 System Manual page 192

Configuration
6. Setting up users, terminals and DDIs
7. Setting up the Auto Attendant
For each step you can display a help page or see it in the lower part of the window
where it is already displayed. You can skip individual steps of the setup wizard or
exit the setup wizard at any time in order to return to the WebAdmin start page.
Configuration assistant
The configuration assistant goes further than the setup wizard and helps you to
configure a communication system in sequence, from scratch. Logging on as ad-
ministrator in WebAdmin (expert or default mode) allows you to display the config-
uration assistant on the WebAdmin start page.
The configuration assistant comprises the following steps:
1. IP addressing of the communication server
2. Regulating access control
3. Checking licences
4. Configuring media resources
5. Setting time and date
6. Checking network interfaces
7. Setting up SIP providers and accounts
8. Specifying user permissions
9. Create users and DDI numbers
10.Checking outgoing routing
11.Setting up the Auto Attendant
12.Setting up music on hold
13.Setting up an announcement service
14.Entering abbreviated dialling contacts
15.Saving configuration data
For each step, the upper half of the screen displays the configuration overview; the
right-hand side contains notes and instructions about the step you have selected.
The WebAdmin online help can be called up for further help.
You can skip individual configuration assistant steps or call up additional views of
the WebAdmin navigation tree. To hide the configuration assistant again, untick
the control box on the WebAdmin start page.
192 Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014