Mitel Aastra 470 System Manual page 222

Operation and Maintenance
Note:
The protective cover should not be used for Aastra 620d, Aastra 630d
with a white card holder or in Aastra 622d, Aastra 632d and
Aastra 650c.
7. Insert the battery and cover the battery compartment.
Fig. 86 microSD card
Behaviour after inserting a new microSD card
After starting the cordless phone you will receive, in the start phase, a message in-
forming you that a new card has been detected. The two typical cases are de-
scribed below:
Cordless phone has not yet been registered:
Accept the new card.
 The local settings are copied to the card.
Register the phone on the communication server.
 The registration data is stored on the card.
 Modifications on the local settings are henceforth also stored on the card.
Cordless phone is already registered:
Accept the new card.
 The local settings are copied to the card.
 The registration data is copied to the card and erased from the cordless phone
memory.
 Modifications on the local settings are henceforth also stored on the card.
222 Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014