Installation
Connection
The diagram below shows the connection of an interface card 16DSI with termi-
nals. This card has 2 four-fold assigned RJ45 sockets. The 8 individually assigned
RJ45 sockets are connected directly while the 2 four-fold assigned sockets are
looped via the front panel of the fan-out-panel connector (FOP) strip using 2 patch
cables.
Fig. 64
Connection of four-fold assigned sockets via FOP connector strip
The patch cables are available separately in lengths of 1 and 2 m (see
"Equipment
Overview", page
260).
The internal wiring of the fan-out panel is shown in the table below. The wiring is
shown for sockets 1 - 4. Sockets 5 - 8 are wired accordingly.
Aastra 470 as of R3.2
151
syd-0337/1.6 – R3.2 – 09.2014