Mitel Aastra 470 System Manual page 237

Event / error message
Language file download suc-
cessful
LCR on alternative network
provider
Licence for integrated mobile/
external phone available
Licence for PMS interface
available
Licence invalid, restricted
operating mode 4 hours after
restart
Licences for offline operations
expired
Local supply error on radio
unit
Local supply on radio unit
available
Mains voltage failure
Malfunction
Monitor event
No DECT DSP channels avail-
able
No DTMF receiver for inte-
grated mobile phones availa-
ble
No response from network
No response from user
Node: Connection lost
Node: Connection re-estab-
lished
NTP: Synchronisation failed
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014
Trigger condition
The downloading of a language file via FTP
server for an Aastra SIP terminal has been suc-
cessfully completed.
Automatic switch from primary network pro-
vider to secondary network provider using LCR
function
A sufficient number of licences is now available
again for integrated mobile phones.
The Hospitality PMS Interface
number of Hospitality PMS Rooms
now available.
The system software loaded requires a software
release licence. Without this licence the system
software's functionality is severely restricted 4
hours after the restart.
The maximum period of 36 hours for the tem-
porary licence activation has expired.
Local power supply of a SB-4+ / SB-8 / SB-8ANT
radio unit failed or unavailable
Local power supply of a SB-4+ / SB-8 / SB-8ANT
is now again available
Event message once mains power is restored
• Mains power has failed more frequently than
entered in the trigger table
A hardware or software error has occurred. The
error ID can help Support to pinpoint the possi-
ble cause of the error.
Monitor event
DECT channels on DSP-0x overloaded
A permanent DTMF receiver (for detection suf-
fix dialling function codes) could not be
assigned to an integrated mobile phone with
enhanced functionality.
No answer to Call Setup on BRI-T/PRI interface Port number of the exchange
No answer to incoming DDI call from user on S
bus or DSI
A node is not connected to the Master for a cer-
tain amount of time (configurable).
A node is reconnected with the Master for a cer-
tain amount of time (configurable) after an
interruption.
Time synchronization via the NTP server (NTP =
Network Time Protocol) has failed.
Operation and Maintenance
Details
Parameter 1: FTP server
address, Parameter 2: Lan-
guage file type and name, date,
time
Provider ID, date, time
Date, time
or a sufficient Date, time
licences ara
Date, time
Date, time
Card number, port number,
date, time
Card number, port number,
date, time
Date, time
Error ID, date, time
Monitor Type, Date, Time
Date, time
BCS Ref., date, time
line circuit, date, time
DDI No., date, time
Node number, date, time
Node number, date, time
Date, time
237