Mitel Aastra 470 System Manual page 234

Operation and Maintenance
Event / error message
Connection to PMS system
failed
Creation instance on backup
communication server failed
Creation instance on backup
communication server suc-
cessful
CSTA sessions within the
licence limit again
CTI first party: Connection
established
CTI first party: Connection
lost
CTI third party: Connection
established
CTI third party: Connection
lost
Definitive activation licence
missing
Definitive activation licence
now present
Dual Homing within the
licence limit again
E-mail send failed
234
Trigger condition
An unsuccessful attempt was made to establish
a connection with a hotel management system
(PMS system).
Reason: 1: Call rejected, 2: Destination unob-
tainable, 3: Destination busy, 4: Connection
timeout, 5: Wrong address, 6: Unknown error
The backup communication server was unable
to create or modify a user or terminal instance
with the received configuration data.
Note:
This event message is generated by the backup
communication server.
The backup communication server was able
(following one or more previous failed
attempts) to create or modify a user or terminal
instance with the received configuration data.
Note:
This event message is generated by the backup
communication server.
CSTA Sessions licences are now available again. Number of licences, date, time
The ATPC3 first-party link was (re)established
The ATPC3 first-party link was interrupted
because the cycle signal is missing.
The ATPC3 third-party link was (re)established Date, time
The ATPC3 third-party link was interrupted
The initial temporary activation of the commu-
nication server for a certain duration (e.g. 90
days) was started. After this period, the com-
munication server switches to restricted oper-
ating mode (see "Restricted operating mode",
page 76).
A licence code with a definitive activation
licence was entered.
There are now enough licences available for
registering SIP phones in the Aastra 6700i/
6800i series on a backup communication
server.
Note:
This event message is generated by the backup
communication server.
The system was unable to send an e-mail
because an error occurred.
Meaning of the parameter values in
Details
Error, date, time
Instance type (0: User,
1: terminal), user number or
terminal ID, date, time
Instance type (0: User,
1: terminal), user number or
terminal ID, date, time
User number, date, time
User number, date, time
Cause (0: Logoff, 1: missing
cycle signal), date, time
Date, time
Date, time
Date, time
Cause/action, e-mail client,
additional information, date,
Tab. 97 time
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014