Mitel Aastra 470 System Manual page 103

Mounting the auxiliary power supply APS2
The auxiliary power supply APS2 is supplied with a fastening kit that includes two
fastening plates and 6 screws. If a fan-out-panel FOP or EFOP is already fitted, the
auxiliary power supply can be installed behind the connection panel.
The following diagram shows the fan-out-panel FOP from below with the auxiliary
power supply fitted.
Connection panel FOP
Fastening
board
Fig. 25 Fan-out-panel with auxiliary power supply fitted (viewed from below)
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014
Auxiliary power
suply unit (APS2)
Installation
Fastening
board
103