Installation
Tab. 77
Status LED on the Ethernet interfaces
Green LED
Yellow LED
On
On
flashing
flashing
On
Off
flashing
Off
Off
On
Off
flashing
Cable Requirements
Use commercial Cat. 5 cable, or choose a cable type with the following characteris-
tics:
Tab. 78
Requirements for an Ethernet cable
Core pairs cores
Stranded
Wire diameter, core
Screening
Category
See also:
For more information about the Ethernet interface on the application
card, see the CPU2-S application card installation manual.
162
Speed
State
10 Mbit/s
Port has a connection with the network
10 Mbit/s
Port is receiving or sending data
100 Mbit/s
Port has a connection with the network
100 Mbit/s
Port is receiving or sending data
1 Gbit/s
Port has a connection with the network
1 Gbit/s
Port is receiving or sending data
4 2
yes
0.4...0.6 mm
yes
Cat. 5 minimum
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014