Mitel Aastra 470 System Manual page 257

The system status lines provide useful information for a more in-depth fault diag-
nosis. They can be printed out and sent to customer support on request.
Tab. 108 The displayed data and what it means
Display Description
BCS: xxxxx Number of existing BCS references
CC: xxxxx Number of existing call controls
SUBS: xxxx Number of users in the system
NSUB: xxxx Number of PISN users in the system
LINE: xxxx Number of lines in the system
DIST: xxxx Number of call distributions in the sys-
tem
DDIN: xxxx Number of DDI numbers in the system
ABB: xxxx Number of abbreviated dialling num-
bers in the system
System failures menu item
Tab. 109 System failures display
== SYSTEM FAILURES
W 15.09.10 13:32
W 06/12/2010 13:32
The system's last 80 system failures (restarts) are displayed. The restarts are incre-
mented in the counter in the top right (0...255).
Significance of the display: Error type W = restart (watchdog), date, time
When printing, only the last 4 addresses are printed out.
Power failures menu item
Tab. 110 Power failures display
== POWER FAILURES
01/12/2010 16:13
Only the restart time is recorded.
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014
Normal value/
idle state
BCS: 00000
CC: 00000
SUBS: 0000
NSUB: 0000
LINE: 0000
DIST: 0000
DDIN: 0000
ABB: 1000
011A59F2, 011A5A8C,
011A59F7 011A5A82
Operation and Maintenance
Note
Each active connection needs 2
BCS references
For each BCS reference there is
one or more CC
0000: No ports busy
0000: No PISN user in the system
0000: No lines defined
0000: No call distribution defined
0000: No DDI numbers defined
1000: Default value unchanged
52
01156FFE
01156FF1
257