Mitel Aastra 470 System Manual page 239

R3.2
Hide thumbs Also See for Aastra 470:
Table of Contents

Advertisement

Event / error message
Remote maintenance ena-
bled
Satellites missing after super-
vision time
SIMPLE/MSRP within the
licence limit again
SIP account available
SIP account not available
SMS gateway reachable
SMS gateway unreachable
Software upgrade IP system
phone failed
Software upgrade IP system
phone successful
Software upload
Standard SIP terminals within
the licence limit again
Synchronisation loss on trunk
Synchronisation re-estab-
lished
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014
Trigger condition
The remote maintenance has been activated
(The report is output unfiltered on local desti-
nations).
After an AIN update (Master and all satellites)
some satellites no longer have a connection to
the Master.
There are now enough licences available for
using the MSRP and/or SIMPLE protocol for
users.
The SIP account has successfully registered
with the SIP provider.
The SIP account cannot register with the SIP
provider for a certain reason (0: Provider unob-
tainable / 1: no permission). The event is trig-
gered only if the parameter
required
is configured to Yes.
External SMS gateway again reachable
External SMS gateway unobtainable by net-
work provider or incorrectly configured
The software update of an Aastra 5360ip/
5361ip/5370ip/5380ip has failed for the stated
reason.
The software update of an Aastra 5360ip/
5361ip/5370ip/5380ip has now been success-
fully completed after unsuccessful attempt(s).
During an upload in system status:
Update running
Supervision running
Normal operation
SIP Terminals
and
Video Terminals
now available.
A BRI/PRI interface entered in the clock pool has
lost the system clock
Synchronization with the network has been
restored on at least one BRI/PRI interface.
Operation and Maintenance
Details
Date, time
Total satellites missing, Satel-
lites rolled back, Date, Time
Date, time
Provider, account, date, time
Provider, account, date, time
Registration
Date, time
Date, time
User number, terminal ID, rea-
son, date, time
User number, terminal ID, date,
time
Parameter 1:
• 0: "New communication
server software loaded, start-
ing...",
• 1: New communication server
software crashed, rollback
performed
• 3: New communication
server software started and
running well
Date, time
licences are
Parameter 1=1:
licence, parameter 2=1:
Terminals
Port number, date, time
Date, time
SIP Terminals
Video
licence, data, time
239

Advertisement

Table of Contents
loading

Table of Contents