Technical Data; Network Interfaces - Mitel Aastra 470 System Manual

Designation
SEV958.EXP.RFU-1
KAB958 CABLE RJ45-08-6M-1
ELE957 CABLE-RJ45-6M-1
CABLE PATCH 8P 1M SHIELDED BLUE
CABLE PATCH 8P 2M SHIELDED BLUE
1)
Version varies from country to country
2)
The availability/release depends on the sales channel.
3)
Available as of R2.1 SP1
Tab. 115 Overview of spare parts
Designation
SPARE PART /SEV958 CPU1-1
SPARE PART /SEV958 DRAM-1G-1
SPARE PART /SEV958 CF-1G-1
SPARE PART /SEV958.EXP.A470-LIC-1
SPARE PART /SEV958 FAN-1
SEV957 PSU-60W-1
SEV957 MAINS CABLE-1
7. 3

Technical data

7. 3. 1

Network interfaces

The following technical data applies to the network interfaces:
Basic rate interface BRI-T
• Standard Euro ISDN interface as per CTR-3
• Configurable for point-to-point or point-to-multipoint operation
Analogue network interfaces
• Voice path with A/D and D/A conversion (standard PCM, A-law)
• Transmission as per ES 201 168 (level country-specific)
• Signalling as per TBR 21
• Pulse or DTMF dialling, Flash signal
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014
Description
Redundant fan unit on fastening frame (RFU)
Prefabricated system cable 4 x RJ45, 6 m
Prefabricated system cable 12 x RJ45, 6 m
RJ45 patch cable, blue, screened, 1 m
RJ45 patch cable, blue, screened, 2 m
Description
Call manager card CPU1 (excl. RAM, Flash, EIM)
RAM module for call manager card CPU1
Flash module for call manager card CPU1
EIM card for call manager card CPU1
Fan with fastening screws
Power supply unit for EFOP fan-out-panel
Two-pin standard Euro power cable for EFOP fan-out-
panel power supply unit
Annex
261