Commissioning
9.1 HMI screens and softkeys
9.1
HMI screens and softkeys
Configuring safety-related functions
When selecting "Commissioning/NC/Safety-Integrated" you reach the starting
screen for the Safety Integrated commissioning support. The following screen is
displayed 9-1:
Fig. 9-1
View of the axes (horizontal softkey)
Softkey, safe axes
All of the axes are listed in this screen that were activated for Safety Integrated.
Soft key: All axes
Here, defined axes are listed independent of whether it involves a safety axis or
not.
9-342
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 03.2006 Edition
Example for "Commissioning/NC/Safety-Integrated" for 840D sl
© Siemens AG, 2006. All rights reserved
03.06