Siemens SINUMERIK 840D sl Function Manual page 488

Appendix
A.1 Customer Support
Table A-1 Range of services for machinery construction OEMs and end customers
Portfolio
Commissioning
Acceptance report
Approval procedure
Workshop
Hotline
On-site service (local)
A-488
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 03.2006 Edition
Description of the services available
The safety functions are commissioned based on the configuration that has
been created. The customer provides the machine so that the drives can be
traversed and the control cabinet is wired according to the configuration.
Based on the submitted configuration documentation and commissioning,
an acceptance report for the safety functions is drawn-up. This includes:
S
Description of the machine (name, type, ...)
S
Description of the safety and operator concept
S
Description of the axis-specific safety functions
S
All of the safety functions are tested including the SPL logic
S
The test results are recorded
The customer receives the acceptance report as hard copy and on an
electronic data medium.
Support with processing and line of argument for the approval procedure by
certified bodies (e.g. regulatory bodies) or large end customers.
Workshops are held on the subject of machine safety adapted to
customer-specific requirements; if required, these workshops can be held at
the customer's site. Possible contents:
S
Machinery Directive, Standards in general
S
C Standards (machine-specific)
S
Hazard analysis, risk analysis
S
Control categories (acc. to EN 954-1)
S
SINUMERIK Safety Integrated
S
Configuration, machine data
S
Commissioning
S
Acceptance report
An expert for "SINUMERIK Safety Integrated
Hotline number should series errors or problems occur during installation
and commissioning (start-up).
Experts analyze problems that are encountered on-site. The causes are
eliminated or counter-measures are drawn-up and implemented where
necessary.
®
– function and system description
®
" can be reached at the
© Siemens AG, 2006. All rights reserved
03.06