Siemens SINUMERIK 840D sl Function Manual page 399

03.06
© Siemens AG, 2006. All rights reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 03.2006 Edition
10.2 NCK safety alarms for Sinumerik 840D sl
– 67
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[8] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 68
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[9] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 69
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[10] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 70
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[11] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 71
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[12] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 72
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[13] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 73
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[14] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 74
The setting in MD 36932 $MA_SAFE_VELO_OVR_FACTOR[15] does
not correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 75
The setting in MD 36946 $MA_SAFE_VELO_X does not correspond
with the associated drive parameter assignment.
Remedy
Copy SI data.
– 76
The setting in MD 36963 $MA_SAFE_VELO_STOP_REACTION[0]
does not correspond with the associated drive parameter assignment.
Diagnostics
10-399