Diagnostics
03.06
10.2 NCK safety alarms for Sinumerik 840D sl
Remedy
Copy SI data.
– 17
The setting in MD 36937 $MA_SAFE_CAM_POS_MINUS[0] + MD
36940 $MA_SAFE_CAM_TOL does not correspond with the
associated drive parameter assignment.
Remedy
Copy SI data.
– 18
The setting in MD 36937 $MA_SAFE_CAM_POS_MINUS[0] does not
correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 19
The setting in MD 36936 $MA_SAFE_CAM_POS_PLUS[1] + MD
36940 $MA_SAFE_CAM_TOL does not correspond with the
associated drive parameter assignment.
Remedy
Copy SI data.
– 20
The setting in MD 36936 $MA_SAFE_CAM_POS_PLUS[1] does not
correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 21
The setting in MD 36937 $MA_SAFE_CAM_POS_MINUS[1] +
$MA_SAFE_CAM_TOL does not correspond with the associated drive
parameter assignment.
Remedy
Copy SI data.
– 22
The setting in MD 36937 $MA_SAFE_CAM_POS_MINUS[1] does not
correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
– 23
The setting in MD 36936 $MA_SAFE_CAM_POS_PLUS[2] + MD
36940 $MA_SAFE_CAM_TOL does not correspond with the
associated drive parameter assignment.
Remedy
Copy SI data.
– 24
The setting in MD 36936 $MA_SAFE_CAM_POS_PLUS[2] does not
correspond with the associated drive parameter assignment.
Remedy
Copy SI data.
© Siemens AG, 2006. All rights reserved
10-392
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 03.2006 Edition