6. Gently press the pin connector into the socket until it is fully seated.
7. Remove the yellow backplane warning label from the top lock latch on the 201i
What is next?
Continue with
Installing the 201i server in the large Meridian 1 switch
Introduction
The 201i server occupies two slots. You can install the 201i server in slots 0 through 14. Ensure
that both slots have electrical backplane connectivity.
®
Avaya CallPilot
201i Server Hardware Installation
server.
Installing the 201i server in the large Meridian 1 switch
What is next?
on page 43.
December 2010
43