Snmp System Name, Contact, And Location; Disable Snmpv1 And Snmpv2 - Avaya ERS 2500 Technical Configuration Manual

10.5 SNMP System Name, Contact, and Location

To add a switch system name, SNMP sysContact value, enter the following command:

2526T-PWR(config)# snmp-server name 2526T-10
2526T-10(config)#
To add a SNMP server contact, SNMP sysContact value, enter the following command:

2526T-PWR(config)# snmp-server contact <name>
To add a SNMP location, SNMP sysLocation value, enter the following command:

2526T-PWR(config)# snmp-server location <string up to 255 chracters using ""
between string if spaces are used>
To change back to the default settings, enter the following commands:

2526T-10(config)# default snmp-server location

2526T-10(config)# default snmp-server contact

2526T-10(config)# default snmp-server name
2526T-PWR(config)#

10.6 Disable SNMPv1 and SNMPv2

SNMPv1 and SNMPv2 access can be disabled by entering the following commands:

ERS-Stackable(config)# no snmp-server community rw

ERS-Stackable(config)# no snmp-server community ro
Avaya Inc. – External Distribution
avaya.com
50