Tools Required To Install The Mx2020 Router Using A Router Transport Kit; Tools And Parts Required For Connecting An Mx2000 Router To Power - Juniper MX2020 Hardware Manual

Reinstalling Components in the MX2020 Router After Installing in a Rack | 277

Tools Required to Install the MX2020 Router Using a Router Transport Kit

To install the router using a router transport kit, you need the following tools and equipment:
Router transport kit—MX2K-TRNSPRT-KIT
Front component shipping covers
Rear component shipping covers
Phillips (+) screwdrivers, numbers 1, 2, and 3
1/2-in. (12.7 mm) drive ratchet
1/4-in. (6.35 mm) torque-controlled driver or socket wrench to tighten the nuts on the router transport
kit
1-1/8-in. (28.57 mm) torque-controlled driver or socket wrench to tighten router transport kit winch
mechanism
9/16-in. or 14-mm open-end or socket wrench with extension to remove bracket bolts from the shipping
pallet
Electrostatic discharge wrist strap
Antistatic mat
RELATED DOCUMENTATION
Overview of Preparing the Site for the MX2020 Router | 121
Removing Components from the MX2020 Router Chassis Before Installing it in a Rack | 245
Installing the MX2020 Router Using a Router Transport Kit | 270
Reinstalling Components in the MX2020 Router After Installing in a Rack | 277

Tools and Parts Required for Connecting an MX2000 Router to Power

To provide power to the router, you need the following tools and parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5 mm flat-blade (–) screwdriver
224