Power Cord Warnings (Ac Model) - Juniper E Series Hardware Manual

WARNING:
lightning activity.
WARNING:
before attaching power cables.
WARNING:
WARNING:
working on equipment that is connected to power lines. Metal objects heat up
when connected to power and ground and can cause serious burns or become
welded to the terminals.
WARNING:
or the backplane. Doing so may cause electric shock and serious burns.
CAUTION:
equipment into a rack.
ERX-310 Power Cord Warnings (AC Model)
WARNING:
cords BEFORE servicing to avoid electric shock.
Do not work on the system or connect or disconnect cables during
Be sure circuit breakers for the power source are in the OFF position
Before servicing the E-series router, turn off the power.
Remove jewelry (including rings, necklaces, and watches) before
Do not insert any metal object, such as a screwdriver, into an open slot
Evaluate the overall loading of the branch circuit before you install any
This unit has more than one power-supply cord. Disconnect 2 power
Denne enhed har mere end een strømfordelingsledning. Fjern ledning(er) nummer
2 FØR eftersyn for at undgå elektrisk stød.
Waarschuwing! Dit apparaat heeft meerdere netsnoeren. Vermijd elektrische
schok! Verwijder 2 netsnoeren ALVORENS onderhoud te verrichten.
Tässä laitteessa on useampi kuin yksi verkkojohto. Irrottakaa 2 verkkojohtoa
ENNEN huoltoa sähköiskujen välttämiseksi.
Attention: Cet appareil comporte plus d'un cordon d'alimentation. Afin de prévenir
les chocs électriques, débrancher les 2 (donner le nombre de cordons) cordons
d'alimentation AVANT le dépannage.
Dieses Gerät hat mehrere Stromversorgungskabel. Klemmen Sie 2 Stromkabel VOR
der Wartung ab, um einen elektrischen Schlag zu vermeiden.
L'unità ha più di un cavo di alimentazione. Scollegare 2 cavi di alimentazione
PRIMA di usarla, onde evitare scosse elettriche.
Denne enheten har mer enn en nett-tilkobling. 2 nettkabler må frakobles FØR
service for å unngå elektrisk støt.
Chapter 3: Installation Guidelines and Requirements
Safety Guidelines
! 27