Chapter 12 Module Specifications; Module Functionality - Juniper E Series Hardware Manual

Chapter 12
Module Specifications

Module Functionality

Table 20: Module functionality
Module
Assembly Name Description
CE1
CE1 Channelized E1
This chapter provides information about line modules, SRP modules, and I/O
modules available for E-series routers. All line modules, with the exception of the
IPSec Service and Tunnel Service module, combine with I/O modules to provide
particular capabilities and connections.
In this chapter, the term module assembly is used to describe the
NOTE:
combination of a line module and an I/O module.
Topic
Module Functionality
Module Specifications
I/O Module Specifications
See Table 20 for module details such as assembly name, capabilities, module and
I/O module label, and software release compatibility.
The table lists the first software release that each module and its corresponding I/O
modules support. If a module has been deprecated, the final software release that
supports the module is listed; otherwise, N/A is displayed. Because of modifications
and updates, some versions of modules support only later software releases than
those indicated in the table.
Capability
E1
HDLC framing
Line Module I/O Module
Label Label
CE1 CE1
FULL
I/O
Page
117
125
128
Release Information
First Final
a
Supported Supported
1.1.0 N/A
Module Functionality
!
117