Juniper E Series Hardware Manual page 24

E-series Hardware Guide
6 !
E-series Routers
Installation procedures and operating procedures are identical for both systems. All
ERX-7xx/14xx models use the same SRP I/O module, but different power input
modules are used.
The router may look different from the routers shown in the figures in this
NOTE:
chapter, depending on the line modules in the slots.
Figure 4: ERX-14xx model, front view
Fan tray
behind bezel
Line module
SRP module
PCMCIA slot
Air filter (optional)
behind bezel
Bezel
Cable
management
bracket