Juniper E Series Hardware Manual page 26

E-series Hardware Guide
8 !
E-series Routers
The ERX-705 chassis is the same as the ERX-710 chassis (see Figure 6 and
Figure 7). The chassis contains seven slots to accommodate modules. Installation
procedures and operating procedures are identical for both systems. All
ERX-7xx/14xx models use the same SRP I/O module, but different power input
modules are used.
The router may look different from the routers shown in the figures in this
NOTE:
chapter, depending on the line modules in the slots.
Figure 6: ERX-7xx model, front view
Line module
Fan tray
SRP module
PCMCIA slot
Figure 7: ERX-7xx model, rear view
I/O
modules
Power input
module
Power switches
SRP I/O module