Service manual OEB/OES/OGB/OGS
Instructions:
5.
Please wait until the update process is completely finished. While this is taking
place the grey bar (see red arrow in Screenshot 2) completely fills up to 2
times!
6.
Then remove the USB stick and click on "Exit" (see Screenshot 3).
7.
If the combi steamer starts as usual in the operating mode, perform another
update of the control module (see point 6.3.3).
8.
If the following screen appears (see screenshot 4) repeat steps 2 to 7.
Screenshot 2
AS/11-2011
Screenshot 3
6_03e_Update of Software EasyTouch-control_b.doc
Screenshot 4
Page 2 / 5