Updating Databases With A Sd Card - Garmin GTN 625 Pilot's Manual

18.2.2

Updating Databases with a SD Card

To update the GTN database use an SD card. Instructions on updating the
GTN database and the required equipment is found at flyGarmin.com.
The ChartView database is provided directly from Jeppesen. Contact
Jeppesen (jeppesen.com) for ChartView subscription and update information.
An enablement card that is purchased from Garmin is separate from the Jeppesen
database and is required to enable ChartView.
1. Download the database updates to the Garmin Database Card
from the appropriate website.
2. Insert the database card into the slot of the GTN.
3. Apply power to the GTN.
4. The database update page will be displayed, listing all effective
database updates on the database card. Databases cycles
that are not effective or already installed will be kept on the
Garmin Database Card as standby databases until they become
effective. Hold down the dual-concentric knob while applying
power to the GTN to force the update of these databases.
190-01004-03 Rev. P
Figure 18-1 Updated Databases
GTN 625/635/650 Pilot's Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
18-11