Garmin GTN 625 Pilot's Manual page 470

14.2
Foreword
The Flight Timers function provides count up/down timers, plus automatic
Getting
recording of departure time, and total trip time. Departure and total trip time
Started
recording can be configured to run either any time unit power is on, or only when
Audio &
your ground speed exceeds the in-air threshold set by the installer (for example,
Xpdr Ctrl
30 knots). A flexible Generic Timer is available for general timing needs.
Com/Nav
NOTE: When a count up timer is used, the preset value has no function.
FPL
Direct-To
Proc
Wpt Info
Map
Selected
Counter
Traffic
Direction
Select Preset
Terrain
Reset or
Weather
Preset Timer
Nearest
Services/
Music
Utilities
Reset Timer
Select
System
Criteria for
Timer Start
Messages
Symbols
Appendix
Index
14-10
Flight Timers
1. While viewing the Utilities page, touch the Flight Timers key.
2. If the Generic Timer Direction counter is set to "Up," the Reset
Timer key will be shown and when touched will return the
timer to 00:00:00. If the Direction counter is set to "Down,"
the Preset Timer key will be shown and the key will return the
timer to the Preset time value.
Time
Figure 14-11 Utility Flight Timers Page (Generic Timer)
3. Touch the Trip/DEP Timers or Generic Timer keys to toggle
between the timer types.
Figure 14-12 Utility Flight Timers Page (Trip/DEP Timers)
4. Touch each key as desired to set up timer operation.
GTN 625/635/650 Pilot's Guide
Start/Stop Generic Timer
Set Departure Time to Current
Local Time of Timer Start
Elapsed
Time
Touch to Toggle
Timers
Elapsed
Time
Departure Time
(Local Time)
Touch to Toggle
Timers
190-01004-03 Rev. P