Garmin GTN 625 Pilot's Manual page 466

14.1.1
Foreword
This sets the desired ending altitude for the VCALC setup.
Getting
Started
Audio &
Xpdr Ctrl
Selected
Altitude
Com/Nav
Numeric
Keypad
FPL
Direct-To
Proc
Wpt Info
14.1.2
Map
This value selects the altitude reference that will be used for VCALC calculations.
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
14-6
Target Altitude
1. While viewing the VCALC page, touch Target ALT.
Figure 14-6 Select VCALC Target Altitude
2. Use the numeric keypad to select the desired Target Altitude
and then touch the Enter key.
Altitude Type
1. While viewing the VCALC page, touch Altitude Type.
2. Touching the Altitude Type key will toggle between MSL and
Above WPT. "Above WPT" is only available for waypoints that
are airports.
GTN 625/635/650 Pilot's Guide
Backspace
Key
Touch Enter or
Press Small Knob
to Save Number
190-01004-03 Rev. P