Select Local Barometric Pressure - Garmin GTN 625 Pilot's Manual

9.7.1
Foreword
Getting
Started
Audio &
Xpdr Ctrl
9.7.2
Com/Nav
FPL
Direct-To
Proc
9.7.3
Wpt Info
The TCAD 9900B Menu allows control over the settings for the TCAD Traffic
display.
Map
Traffic
Set Traffic
Audio Volume
Terrain
Weather
Nearest
9.7.3.1
Services/
Music
Utilities
System
Touch To Lower
Messages
Symbols
Appendix
Index
9-30

Select Local Barometric Pressure

1. While viewing the TCAD display, touch the Baro key to select
the local barometric pressure.
2. Use the keypad to select the values and touch Enter to save
the values.
Select Active Shield
1. While viewing the TCAD display, touch the Active Shield key to
select the Active Shield values (Departure, Enroute, or Ground).
2. Touch the desired setting to save the values.
TCAD 9900B Traffic Menu
1. While viewing the Traffic page, touch the Menu key.
Figure 9-26 TCAD 9900B Traffic Menu
2. Touch the desired key from the menu to make any settings.
Traffic Audio
1. While viewing the TCAD Control menu, touch the Traffic
Audio key.
The Volume
Figure 9-27 TCAD Traffic Audio
2. Touch the arrow keys to raise or lower the TCAD Traffic Audio
level. The selected volume will be shown as a percentage value
and graphically with a bar graph.
GTN 625/635/650 Pilot's Guide
Select Shield Setup
Bar Graph Showing Volume Level
Select Approach
Mode: Set,
Armed, or Active
Touch To Raise
The Volume
190-01004-03 Rev. P