Database Verification And Fuel Settings - Garmin GTN 625 Pilot's Manual

1.4.2

Database Verification and Fuel Settings

1. When the System and Database Version page appears, ensure
databases are current, then touch Continue.
Software and GPS
Engine Versions
2. When the Instrument Panel Self-Test and Fuel Setting page
appears, check to ensure that the CDI/HSI outputs and
other displayed data are correct on the external interfaced
equipment.
3. Touch each of the Fuel value keys and set the appropriate
values as desired. Fuel capacity units are selected on the
System - Units page.
Start-Up
Instrument
Panel Test
Conditions
Touch to Set
Current Fuel
Quantity
Figure 1-12 Instrument Panel Self-Test & Fuel Settings Page
NOTE: When the GTN is interfaced with a digital fuel computer the pilot
may not be able to manually edit the fuel flow and fuel on board data on
the Self-Test.
190-01004-03 Rev. P
Figure 1-11 System Startup Pages
GTN 625/635/650 Pilot's Guide
Ensure
Required
Databases are
Present and
Current
Touch to
Continue to
Self-Test Page
Touch to Set
Fuel Flow
Touch to Continue
to Home Page
Messages
Appendix
1-7
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Symbols
Index