Garmin GTN 625 Pilot's Manual page 394

11.3.3
Foreword
Getting
Started
Manually
Audio &
Xpdr Ctrl
Request Data
Com/Nav
Coverage
Region Settings
FPL
Direct-To
Proc
11.3.3.1
Wpt Info
It is necessary to request the downloading of weather products. Requests can
be sent manually or set to automatically update at a selected rate. The Connext
Map
weather data may be updated at any time regardless of the automatic update
timing by selecting a Manual Request. When multiple requests are made, some
Traffic
products are merged with the old data (SIGMETs/AIRMETs, TAFs, TFRs, and
Terrain
METARs), but the old data of other products is discarded.
Weather
Nearest
Services/
Music
NOTE: The Auto Request function is only enabled if the GTN is connected
Utilities directly to GSR 56 (software v6.30 and later).
System
Messages
Symbols
Appendix
Index
11-34
Connext Settings
Touch to
Figure 11-55 Connext Settings Menu
Connext Data Request
1. While viewing the Connext Settings Menu, touch the
Request Data key to manually request data.
2. Touch the Auto Request key to set the Auto Request Period.
Figure 11-56 Select Auto Request Period
GTN 625/635/650 Pilot's Guide
Coverage
Diameter
Touch to Select
Request Period
Auto Request
Setting
Datalink
Status
190-01004-03 Rev. P