Garmin GTN 625 Pilot's Manual page 508

Foreword
Getting
Started
Audio &
Xpdr Ctrl
NOTE: The ILS CDI Capture key may be disabled in certain GTN installations.
Com/Nav
15.4.2
The Date/Time setting provides selection of time format (local or UTC;
FPL
12- or 24-hour). UTC (also called "GMT" or "Zulu") date and time are calculated
Direct-To
directly from the GPS satellites' signals and cannot be changed.
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
15-18
3. Touch the ILS CDI Capture key to select Auto Switch or Manual
Selection. This feature enables the unit to automatically switch
from GPS to VLOC on an ILS approach. Refer to Procedures-ILS
Approaches for more detail on ILS approaches.
Date/Time
Figure 15-23 System Date and Time Setup
1. While viewing the System Setup page, touch the Date/Time
key.
2. While viewing the System Setup page, touch Local Offset to
set the time offset for local time.
3. Use the keypad to select the desired local offset and then
touch Enter.
4. While viewing the System Setup page, touch the Time Format
key to select local 12 hour, local 24 hour, or UTC time.
Figure 15-24 Select System Time Format
5. Touch the key for the desired time format.
GTN 625/635/650 Pilot's Guide
Current Selected
Date and Time
Touch to Select
Local Time Offset
Touch to Select
Time Format
Touch Key to Select
Time Format
190-01004-03 Rev. P