Appendix C: Sd Card Use And Databases; Installing And Removing Sd Cards - Garmin G3X Touch Pilot's Manual

APPENDIX C: SD CARD USE AND DATABASES

It is recommended to maintain three SD cards for the G3X system.
NOTE:
One SD card should be used exclusively for loading software, another SD
card should be used exclusively for loading databases, and a third card
should be used exclusively for flight purposes.
When flying the G3X system, any SD card(s) used in the GDU(s)
NOTE:
should contain only files which are necessary for the flight of the aircraft.
Non-essential files may have a negative effect on display performance.
The G3X Touch uses an SD Card for software updates, database updates, MapSource
data, checklist files, Chartview, Flight Data Logging, exporting Track Logs/User
Waypoints, importing/exporting Flight Plans and user-downloaded vehicles. Garmin
recommends using a 8 GB SanDisk
MapSource detailed maps are available from FlyGarmin.com. Refer to the Garmin
website (www.garmin.com) for instructions on downloading software updates. Refer
to the latest revision of the G3X Touch Installation Manual for software update
instructions.

INSTALLING AND REMOVING SD CARDS

NOTE: SD Cards are not waterproof. They should not be exposed to moisture
or excessive static charges, and should be stored in the case supplied with
the card.
190-01754-00 Rev. L
or Toshiba
®
SD Card Slot
SD Card Slot - GDU 46X (10.6 inch)
Garmin G3X Touch Pilot's Guide
SD Card.
®
Appendix C
®
387