Simple Frequency Entry - Garmin GTN 625 Pilot's Manual

3.3.1.4
Foreword
Getting
Started
Audio &
Xpdr Ctrl
3.3.2
Com/Nav
Frequencies can now be entered on the GTN without the leading one
and/or trailing zero(s). As a result, the pilot can now touch "2," "1," and "5" for
FPL
121.50. If a number is pressed that is not valid for the cursor location, the pilot
is presented with a confirmation pop-up upon selecting the typed frequency.
Direct-To
Frequency entry can be accomplished by typing every digit in the frequency or
by leaving off the leading one and/or trailing zero(s). The frequency that will be
Proc
entered is always displayed in the cursor window.
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
3-8
Find User Frequencies
1. While viewing the Find results, touch the User key. A list of
User-created frequencies will be displayed.
2. Touch the desired frequency to load it into the Standby window.

Simple Frequency Entry

1. Touch the Standby frequency field and then touch the 2 key.
Figure 3-15 Simplified Frequency Entry Without Leading Number
2. Touch the 7 key.
Figure 3-16 Second Frequency Number
3. Touch the 2 key.
Figure 3-17 Final Frequency Without Trailing Number
4. Touch Enter.
Figure 3-18 Completed Frequency Entry
GTN 625/635/650 Pilot's Guide
Entered Frequency Value
190-01004-03 Rev. P