Import Flight Plans With A Datacard - Garmin GTN 625 Pilot's Manual

4.6
Foreword
Flight plans can be created on a computer using compatible flight planning
software and saved to the datacard to be imported into the GTN. The imported
Getting
Started
flight plans can then be activated or stored to the flight plan catalog once they
Audio &
are previewed by the pilot.
Xpdr Ctrl
NOTE: Flight plans over 99 waypoints long are truncated at 99 waypoints
Com/Nav
and the last waypoint in the imported/uploaded flight plan may not be the
destination airport.
FPL
NOTE:
Direct-To
NOTE:
Proc
format used by the GNS 400W/500W Series navigators.
Wpt Info
Map
Traffic
Terrain
Weather
Touch to Import
Flight Plan
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
4-48

Import Flight Plans with a Datacard

This feature is available in software v5.10 and later.
The flight plan file format used by the GTN is different than the file
1. While viewing the Flight Plan page, touch the Menu key and
then the Catalog key to display the Flight Plan Catalog.
Figure 4-80 Catalog for Datacard Flight Plan Import
2. An Import key will be present in the menu bar when flight
plans are present on the datacard. Touch the Import key to
open a pop-up with a list of the file names of the flight plans
on the datacard.
GTN 625/635/650 Pilot's Guide 190-01004-03 Rev. P