Garmin GTN 625 Pilot's Manual page 224

8.2
Foreword
In the Map page function, panning allows you to move the map beyond its
current limits without adjusting the map scale. The panning function is selected
Getting
Started
by simply touching the Map display. The In and Out keys at the lower right
Audio &
corner of the page control the map range. Touching the display momentarily
Xpdr Ctrl
switches the display to Map Pan Mode. While in Map Pan Mode, touch the
display gently and drag your finger to pan around the map.
Com/Nav
FPL
Direct-To
Selected
Waypoint or
Proc
Item Info
Touch to Display
Wpt Info
Next Item
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
Touch to Display
System
Messages
Symbols
NOTE: It is possible that multiple airspaces can be stacked vertically and be
Appendix
difficult to visually identify them. Touching the Next key will step through
the airspaces.
Index
8-34
Map Panning
1. Touch the Map page display.
Pan Mode Annunciation and
Coordinates of Map Center
Touch to Edit Flight Plan
Figure 8-38 Map Panning With Airspace Highlighted
2. If you touch an item on the display (waypoint, airspace,
obstacle) there may be other items very close that are difficult
to see at a given zoom level. Touch the Next key to annunciate
and highlight the next item. Each touch of the Next key steps
to another item near the map pointer.
Next Item
Nearest Item
Highlighted
Figure 8-39 Map Panning With Next Airspace Shown
GTN 625/635/650 Pilot's Guide
Next Nearest Item
Selected Airspace
or Wpt Highlighted
Aircraft Present
Position
190-01004-03 Rev. P