Ident; Transponder Mode - Garmin GTN 625 Pilot's Manual

2.1.2

IDENT

1. Touch the IDENT key once to reply with an identifying squawk
code.
2. The IDENT key will show a green ID in the bottom right corner
of the key to indicate active Ident.
2.1.3

Transponder Mode

1. Touch the Mode key to allow selection of the transponder
mode.
2. Touch the Up/Down keys or touch the display and drag the
display up or down to view the available selections.
Transponder Modes
Standby Mode Selection Not Shown
3. Touch the desired Transponder mode to select it and then
touch the Enter key.
2.1.3.1 Standby
1. Touch the Mode key and select Standby and then touch the
Enter key to place the transponder into Standby mode.
190-01004-03 Rev. P
Selected Transponder
Figure 2-5 Transponder Mode Selection
Figure 2-6 Transponder Mode Choices
GTN 625/635/650 Pilot's Guide
Touch to Select
Transponder Mode
Selected
Transponder Mode
Touch the Up/Down
Keys or Drag Display
to View Modes
2-3
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index