Tcad 9900Bx Traffic Menu - Garmin GTN 625 Pilot's Manual

9.8.2
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
9.8.3
The TCAD 9900BX Menu allows control over the settings for the TCAD
Utilities
Traffic display.
System
Select Shield
Messages
Setup
Set Traffic
Symbols
Audio Volume
Appendix
Index
9-34
Select Altitude Filter
The Altitude Filter limits the traffic displayed to the Below, Normal,
Above or Unrestricted altitude block as listed in the "Displayed Traffic
Range" table. The filter altitudes are relative to ownship altitude.
While viewing the Traffic page, touch the Altitude Filter key to
change the altitude filter value. Select the desired altitude filter by
touching the Normal, Above, Below, or Unrestricted keys. The
selection is displayed in the Altitude Filter field.
Selected Altitude Filter
Figure 9-31 Traffic Altitude Filter Selection
Altitude Mode
Below
Normal
Above
Unrestricted
Table 9-16 Displayed Traffic Range

TCAD 9900BX Traffic Menu

1. While viewing the Traffic page, touch the Menu key.
Figure 9-32 TCAD 9900BX Traffic Menu
2. Touch the desired key from the menu to make any settings.
GTN 625/635/650 Pilot's Guide
Displayed Traffic Range
-9,900 ft to 2,700 ft
-2,700 ft to 2,700 ft
-2,700 ft to 9,900 ft
All Traffic Shown
Select Approach
Mode: Set, Armed,
or Active
Toggle Ground
Mode On or Off
190-01004-03 Rev. P