DISPLAYING THE METRIC ALTITUDE OVERLAY
1) Press the PFD Softkey to display the second-level softkeys.
2) Press the ALT UNIT Softkey.
3) Press the METERS Softkey to turn on metric altitude readouts.
4) Press the BACK Softkey to return to the top-level softkeys.
SELECTING THE ALTIMETER BAROMETRIC PRESSURE SETTING
Turn the BARO Knob to select the desired setting.
SELECTING STANDARD BAROMETRIC PRESSURE (29.92 IN HG)
1) Press the PFD Softkey to display the second-level softkeys.
2) Press the STD BARO Softkey.
CHANGE ALTIMETER BAROMETRIC PRESSURE SETTING UNITS
1) Press the PFD Softkey to display the second-level softkeys.
2) Press the ALT UNIT Softkey.
3) Press the IN Softkey to display the barometric pressure setting in inches of
mercury (in Hg).
Or:
Press the HPA Softkey to display the barometric pressure setting in
hectopascals.
4) Press the BACK Softkey to return to the top-level softkeys.
SYNCHRONIZING THE ALTIMETER BAROMETRIC PRESSURE SETTINGS
1) Select the AUX-SYSTEM SETUP Page on the MFD using the FMS Knob.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight BARO in the SYNCHRONIZATION
Window.
4) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
5) Press the FMS Knob to remove the cursor.
190-00645-07 Rev. A
FLIGHT INSTRUMENTS
Garmin G1000 Cockpit Reference Guide for the Quest KODIAK
Flight Instruments
100
™
1