Table of Contents
Advertisement
Installing the NI DAQCard-6533 for PCMCIA
Configuring the NI 653X
In Windows
© National Instruments Corporation
8.
Replace the cover of the computer.
9.
Plug in and power on your computer.
You are now ready to configure your NI 653X.
You can install your NI DAQCard-6533 for PCMCIA in any available
CardBus-compatible Type II PCMCIA slot. Consult the computer
manufacturer for information about slot compatibility.
1.
Power off your computer. If your computer and operating system
support hot insertion, you may insert or remove the NI DAQCard-6533
at any time, whether the computer is powered on or off.
2.
Remove the PCMCIA slot cover on your computer, if any.
You are now ready to configure your NI 653X.
Your NI 653X is automatically configured in Measurement &
Automation Explorer (MAX), which is installed with NI-DAQ in
Windows, or in the NI-DAQ Configuration Utility, which is installed
with NI-DAQ in the Mac OS. All settings are initially configured to
default settings.
If you would like to change or view default settings, complete the following
steps, also available in the DAQ Quick Start Guide:
1.
Launch MAX.
2.
Open Devices and Interfaces.
3.
Right-click the device you want to configure and choose Properties.
4.
Click the Test Resources button to test hardware resources.
To create a virtual channel or to learn about other capabilities of MAX, read
the help files available in MAX by selecting Help»Help Topics.
Chapter 1
1-9
Getting Started with Your NI 653X
NI 653X User Manual
- Quick Links:
- Appendix A Specifications
Hide quick links:
Advertisement
Table of Contents
