Getting Started; Installing Ni-Daqmx; Installing Other Software; Installing The Hardware - National Instruments PCI-6238 User Manual

Getting Started

Installing NI-DAQmx

Installing Other Software

Installing the Hardware

Device Pinouts

© National Instruments Corporation
M Series NI 6238/6239 devices feature eight differential analog input (AI)
channels, two analog output (AO) channels, two counters, six lines of
digital input (DI), and four lines of digital output (DO). If you have not
already installed your device, refer to the DAQ Getting Started Guide. For
NI 6238 and NI 6239 device specifications, refer to the NI 6238/6239
Specifications on
ni.com/manuals
Before installing your DAQ device, you must install the software you plan
to use with the device.
The DAQ Getting Started Guide, which you can download at
, offers NI-DAQmx users step-by-step instructions for
ni.com/manuals
installing software and hardware, configuring channels and tasks, and
getting started developing an application.
If you are using other software, refer to the installation instructions that
accompany your software.
The DAQ Getting Started Guide contains non-software-specific
information on how to install PCI and PXI devices, as well as accessories
and cables.
Refer to Appendix A,
device pinouts.
.
Device-Specific Information, for NI 6238/6239
1-1
1
NI 6238/6239 User Manual