Installing Your Software; Unpacking Your Ni 653X - National Instruments 653 Series User Manual

Chapter 1 Getting Started with Your NI 653X
Device Supported
NI PCI-6534
NI PCI or PXI-7030/6533

Installing Your Software

Note It is important to install NI-DAQ before installing your device(s) to ensure the
device(s) are properly detected.

Unpacking Your NI 653X

Never touch the exposed pins of connectors to prevent electrostatic discharge
Caution
from damaging the device.
NI 653X User Manual
Table 1-1. NI 653X Devices and NI-DAQ Support (Continued)
Version 6.9 or later
Version 6.5.2 or later
Install application development software, such as LabVIEW or
LabWindows/CVI, according to instructions on the CD and the release
notes. If NI-DAQ was not installed with your ADE, then install NI-DAQ
according to the instructions on the CD and the DAQ Quick Start Guide
included with your device.
Your NI 653X is shipped in an antistatic package to prevent electrostatic
damage to the device. To avoid such damage in handling the device, take
the following precautions:
• Ground yourself using a grounding strap or by holding a grounded
object.
• Touch the antistatic package to a metal part of your computer chassis
before removing the device from the package.
Remove the device from the package and inspect the device for loose
components or any sign of damage. Notify NI if the device appears
damaged in any way. Do not install a damaged device into your computer.
Store your NI 653X in the antistatic envelope when not in use.
NI-DAQ Version
Windows
1-6
Mac
N/A
N/A
ni.com