I Commands
interface ethernet 1/4
switch(config-if)#
This example shows how to enter configuration mode for a host interface on a Fabric Extender:
switch(config)#
interface ethernet 101/1/1
switch(config-if)#
Related Commands
Command
interface vethernet
show fex
show interface ethernet
speed
vtp (interface)
Description
Configures a virtual Ethernet interface.
Displays all configured Fabric Extender chassis
connected to the switch.
Displays various parameters of an Ethernet IEEE
802.3 interface.
Sets the speed on the interface.
Enables VLAN Trunking Protocol (VTP) on an
interface.
Cisco Nexus 5000 Series Interfaces Command Reference
interface ethernet
45