Cisco Nexus 5000 Series Interfaces Command Reference - Cisco Nexus 5000 Series Command Reference Manual

Show Commands
Eth1/26
Eth1/27
Eth1/28
Eth1/29
Eth1/30
Eth1/31
Eth1/32
--------------------------------------------------------------------------------
Port-channel VLAN
Interface
--------------------------------------------------------------------------------
Po100
--------------------------------------------------------------------------------
Port
--------------------------------------------------------------------------------
mgmt0
-------------------------------------------------------------------------------
Interface Secondary VLAN(Type)
-------------------------------------------------------------------------------
Vlan1
Vlan100
--------------------------------------------------------------------------------
Ethernet
Interface
--------------------------------------------------------------------------------
Eth100/1/1
Eth100/1/2
Eth100/1/3
Eth100/1/4
Eth100/1/5
Eth100/1/6
Eth100/1/7
Eth100/1/8
Eth100/1/9
Eth100/1/10
Eth100/1/11
Eth100/1/12
Eth100/1/13
Eth100/1/14
Eth100/1/15
Eth100/1/16
--------------------------------------------------------------------------------
Interface
--------------------------------------------------------------------------------
Lo10
switch#
Note the following in the above display:
• Ethernet 1/5 is a Layer 3-ready interface. The following fields in the display help identify an interface
as a configured Layer 3 interface:
• Ethernet 1/5.2 is a Layer 3 subinterface; however, the interface is not ready for Layer 3 configuration
(Status—down).
• Interface Lo10 is a Layer 3 loopback interface.
This example shows how to display a brief summary of interfaces configured as FabricPath interfaces on a
switch that runs Cisco NX-OS Release 5.1(3)N1(1):
switch# show interface brief
--------------------------------------------------------------------------------
Ethernet
1 eth access down
1 eth access down
1 eth access down
1 eth access down
1 eth access down
1 eth access down
1 eth access up
Type Mode
1 eth trunk
VRF Status IP Address
-- up 172.29.231.33
--
--
VLAN Type Mode
1 eth access up
1 eth access down
1 eth access up
1 eth access down
1 eth access down
1 eth access down
1 eth access down
1 eth access down
1 eth access down
1 eth access up
1 eth access down
1 eth access down
1 eth access down
1 eth access down
1 eth access up
1 eth access down
Status Description
up --
◦Mode—routed
◦Status—up
◦Reason—none
VLAN Type Mode
SFP not inserted
SFP not inserted
SFP not inserted
Link not connected
SFP not inserted
SFP not inserted
none
Status Reason
up none
Status Reason
up
up
Status Reason
none
Link not connected
none
Link not connected
Link not connected
Link not connected
Link not connected
Link not connected
Link not connected
none
Link not connected
Link not connected
Link not connected
Link not connected
none
Link not connected
Status Reason

Cisco Nexus 5000 Series Interfaces Command Reference

show interface brief
10G(D) --
10G(D) --
10G(D) --
10G(D) --
10G(D) --
10G(D) --
10G(D) --
Speed Protocol
a-10G(D) none
Speed MTU
1000 1500
--
--
Speed Port
Ch #
10G(D) --
auto(D) --
10G(D) --
auto(D) --
auto(D) --
auto(D) --
auto(D) --
auto(D) --
auto(D) --
10G(D) --
auto(D) --
auto(D) --
auto(D) --
auto(D) --
10G(D) --
auto(D) --
Speed Port
109