Feature Poe - Cisco Nexus 5000 Series Command Reference Manual

feature poe

feature poe
To enable Power over Ethernet (PoE), use the feature poe command. To disable PoE, use the no form of this
command.
feature poe
no feature poe
Syntax Description
This command has no keywords or arguments.
Command Default
Disabled
Command Modes
Global configuration mode
Command History
Release
5.0(3)N2(1)
Examples This example shows how to enable PoE on the switch:
switch(config)# feature poe
Related Commands
Command
power inline
show feature
Cisco Nexus 5000 Series Interfaces Command Reference
36
Modification
This command was introduced.
Description
Configures the power usage for interfaces.
Displays the status of features enabled or disabled on
the switch.
F Commands