Show Vpc Brief - Cisco Nexus 5000 Series Command Reference Manual

show vpc brief

show vpc brief
To display brief information about the virtual port channels (vPCs), use the show vpc brief command.
show vpc brief [vpc number]
Syntax Description
vpc number
Command Default
None
Command Modes
Any command mode
network-admin
Command History
Release
5.2(1)N1(1)
Usage Guidelines
The show vpc brief command displays the vPC domain ID, the peer-link status, the keepalive message status,
whether the configuration consistency is successful, and whether the peer-link formed or failed to form.
This command is not available if you have not enabled the vPC feature. See the feature vpc command for
information on enabling vPCs.
You can display the track object, if you have configured a tracked object for running vPCs on a single module
under the vpc-domain configuration mode.
This command does not require a license.
Examples This example shows how to display brief information about the vPCs:
switch(config)#
show vpc brief Legend: (*) - local vpc is down, forwarding via vPC
peer-link vPC domain id : 10 Peer status : peer adjacency formed ok vPC
keep-alive status : peer is alive Configuration consistency status: success vPC
role : primary Number of vPC configured : 1 vPC Peer-link status
--------------------------------------------------------------------- id Port
Status Active vlans -- ---- ------
-------------------------------------------------- 1 Po10 up 1-100 vPC status
---------------------------------------------------------------------- id Port
Status Consistency Reason Active vlans -- ---- ------ -----------
-------------------------- ------------ 20 Po20 up success success 1-100
Cisco Nexus 5000 Series Interfaces Command Reference
178
(Optional) Displays the brief information for the
specified vPC. The range is from 1 to 4096.
Modification
This command was introduced.
Show Commands