Cisco Nexus 5000 Series Command Reference Manual page 189

Show Commands
This example also shows how to display brief information about the vPCs. In this example, the port channel
failed the consistency check, and the device displays the reason for the failure:
switch(config)#
show vpc brief Legend: (*) - local vpc is down, forwarding via vPC
peer-link vPC domain id : 10 Peer status : peer adjacency formed ok vPC
keep-alive status : peer is alive Configuration consistency status: failed
Configuration consistency reason: vPC type-1 configuration incompatible - STP
interface port type inconsistent vPC role : secondary Number of vPC configured
: 1 vPC Peer-link status
--------------------------------------------------------------------- id Port
Status Active vlans -- ---- ------
-------------------------------------------------- 1 Po10 up 1-100 vPC status
---------------------------------------------------------------------- id Port
Status Consistency Reason Active vlans -- ---- ------ -----------
-------------------------- ------------ 20 Po20 up failed vPC type-1
configuration - incompatible - STP interface port type inconsistent
This example shows how to display information about the tracked objects in the vPCs, which is available
beginning in Cisco NX-OS Release 4.2(1):
switch(config)#
show vpc brief Legend: (*) - local vpc is down, forwarding via vPC
peer-link vPC domain id : 1 Peer status : peer adjacency formed ok vPC
keep-alive status : peer is alive Configuration consistency status: success vPC
role : secondary Number of vPC configured : 3 Track object : 12 vPC Peer-link
status --------------------------------------------------------------------- id
Port Status Active vlans -- ---- ------
-------------------------------------------------- 1 Po10 up 1-100
Related Commands
Command
feature vpc
show port channel summary
Description
Enables vPCs on the device.
Displays information about port channels.
Cisco Nexus 5000 Series Interfaces Command Reference
show vpc brief
179