I Commands
interface mgmt
To enter the management interface configuration mode, use the interface mgmt command.
interface mgmt mgmt-intf-num
Syntax Description
mgmt-intf-num
Command Default
None
Command Modes
Global configuration mode
Command History
Release
4.0(0)N1(1a)
Examples
This example shows how to enter the management interface configuration mode:
switch# configure terminal
switch(config)# interface mgmt 0
switch(config-if)#
Related Commands
Command
show interface mgmt
cdp enable
description (interface)
duplex
lldp (interface)
rate-limit cpu direction
Management interface number. The interface number
is 0.
Modification
This command was introduced.
Description
Displays information about the management interface.
Enables the Cisco Discovery Protocol (CDP) on an
interface.
Adds a description to an interface configuration.
Configures the duplex mode for an interface.
Enables the reception or transmission of Link Layer
Discovery Protocol (LLDP) packets on an interface.
Configures the packet per second (PPS) rate limit for
an interface.
Cisco Nexus 5000 Series Interfaces Command Reference
interface mgmt
51