show running-config poe
show running-config poe
To display the running configuration for Power over Ethernet (PoE) ports, use the show running-config poe
command.
show running-config poe [all]
Syntax Description
all
Command Default
None
Command Modes
EXEC mode
Command History
Release
5.0(3)N2(1)
Examples
This example shows how to display the running configuration for PoE ports:
switch# show running-config poe
Related Commands
Command
show startup-config poe
show tech-support poe
Cisco Nexus 5000 Series Interfaces Command Reference
166
(Optional) Displays detailed information about PoE
ports, including default settings.
Modification
This command was introduced.
Description
Displays the startup configuration information about
PoE ports.
Displays troubleshooting information about PoE ports.
Show Commands