Cisco Nexus 5000 Series Interfaces Command Reference - Cisco Nexus 5000 Series Command Reference Manual

S Commands
Examples
This example shows how to shut down, or disable, a Layer 2 interface:
switch(config)# interface ethernet 1/10
switch(config-if)# shutdown
switch(config-if)#
This example shows how to shut down a Layer 3 Ethernet subinterface:
switch(config)# interface ethernet 1/5.1
switch(config-subif)# shutdown
switch(config-subif)#
This example shows how to shut down a virtual Ethernet interface:
switch(config)# interface vethernet 10
switch(config-if)# shutdown
switch(config-if)#
Related Commands
Command
no switchport
show interface ethernet
show interface port-channel
show interface vethernet
Description
Converts an interface to a Layer 3 routed interface.
Displays the Ethernet interface configuration
information.
Displays information on traffic about the specified
EtherChannel interface.
Displays the virtual Ethernet interface configuration
information.

Cisco Nexus 5000 Series Interfaces Command Reference

shutdown
89