Cisco Nexus 5000 Series Interfaces Command Reference - Cisco Nexus 5000 Series Command Reference Manual

F Commands
This example shows the error message that appears when you attempt to disable Adapter-FEX on a switch
with virtual Ethernet interface configurations enabled:
switch# configure terminal
switch(config)# no feature adapter-fex
Disabling of NIV failed.veth and vntag configs found
Shutdown all veths and Remove them.
Change ports with 'switchport mode vntag' to 'switchport mode access'.
switch(config)#
Related Commands
Command
interface vethernet
port-profile
show feature
switchport mode
Description
Configures a virtual Ethernet interface.
Configures a port profile.
Displays whether or not Adapter-FEX is enabled on
the switch.
Configures the interface as a nontrunking nontagged
single-VLAN Ethernet interface.

Cisco Nexus 5000 Series Interfaces Command Reference

feature adapter-fex
33